SKS 800 | Jung Pumpen
Poly-sumps for drainage water

SKS 800

  • Mark of conformity
  • Single- or duplex units suitable for traffic to class B 125
  • Easy to install
  • Smooth benched deposit free collection chamber
  • Valves can be operated from above
  • Single unit retrofittable as duplex unit

The buoyancy proof sumps are supplied for the house and estate drainage. They can be equipped with one or two pumps.
The sumps are suitable for accessible areas (class A 15) or for traffic areas (class B 125).
Preformed transport handles provide easy transport and placing into its final position.
Wastewater and drainage water can vary widely. Therefore we have a range of different pumps to suit the various grades of impurities.
Buoyancy-proof plastic sump of high grade polyethylene approved by the German Institute for Construction Engineering (DIBt), with socket for inlet and venting, prefabricated discharge connection DN 32 (1¼”) or DN 50 (2”) and ball valve.
For a comfortable installation of the pumps and for an easy pump removal the sump is equipped with an guide rail system. Depending on the sump version the proven guide rail system GR 32 or GR 50 can be used.
Depending on the used extension it is possible to extend the sump to a total height of 2.75 metres. The required type of loading class depends on the site.
The installation depth with a concrete ring cl. A 15 is 1.70 m. The total volume is 740 litres. The storage volume up to the lower edge of the inlet is 190 litres and the residual volume is 90 litres.

Scope of supply

SKS 800 (Single unit)
Plasic sump, assembled with guide rail system DN 32 or DN 50, PP-pipe, vertically closing swing-type check valve, ball valve, stainless steel delivery piping with 1¼ or 2“ external thread, 1 sleeve DN 150 (KG-pipe) for the inlet, 3 ports for connecting DN 100 for cable and venting ­(KG-pipe).
SKS 800 (Duplex unit)
Plastic sump, assembled with 2 guide rail systems DN 32 or DN 50, PP-pipe, 2 vertically closing swing-type check valves, ball valve, stainless steel delivery piping with 1¼ or 2“ external thread, 1 sleeve DN 150 (KG-pipe) for the inlet, 3 ports for connecting DN 100 for cable and venting ­(KG-pipe)

4 results

TypeCode No.
JP47346
JP47347
JP47348
JP47349

Always well informed!

Subscribe to our newsletter


Direct contact

Sales Hotline

Fon + 49 5204 / 17-160

Sales E-Mail

sales.jp@pentair.com

JUNG PUMPEN GmbH

Industriestraße 4-6
33803 Steinhagen
Germany
Fon +49 5204 17-0
E-Mail info@jung-pumpen.de