Multidrain UV3 S, 4 m cable | Jung Pumpen

Multidrain UV3 S, 4 m cable

JP50249
Mechanical data
Pump
Vertical single-stage
Free passage
10 mm
Bearing
Ball bearings, grease-lubricated
Seal on motor side
Rotary shaft seal
Oil chamber
Yes
Seal on medium side
2-fold rotary shaft seals
Run dry protection
Yes
Shaft
Stainless steel
Impeller
Vortex impeller, GFK
Motor housing
Stainless steel
Pump housing
Stainless steel
Submersible
Yes
Weight
4.6 kg
Electrical data
Ciruit
With built-in level control
Pump voltage
1/N/PE~230 V
Motor rating P1
0.34 kW
Motor rating P2
0.23 kW
Current
1.5 A
Power line
4m H05RN-F
Wires
3G0,75
Type of enclosure
IP 68
Insulation class
F
Winding thermostat
Yes
Motor protection
Integrated
Plug
Safety
Performance
Delivery head H [m] 123456
Flow rate Q [m³/h] 76,45,95,24,12,6

Specifications can be changed without notice. Performance subject to ISO 9906 tolerances.

The minimum flow velocity in the pressure piping must be 0.7 m/s according to EN 12056.
This data is represented in the performance curve as a limit of application.

Dimensions and switching points UV3 S (mm)
Dimensions and switching points special float UV3 SF (mm)
Dimensions and switching points special float UV3 S (mm)
Dimensions and switching points special float UV3 S (mm
Example of single pump installation
Example of duplex installation

Single unit: sump area 30x30 cm

Duplex unit: sump min. 50x50 cm

In case of installation beneath the backpressure level the pressure tube must be taken in a loop over the local backup level acc. to EN 12056. Besides, it must be secured with an EN 12050-4-proofed swing-type check valve. Additionally we recommend an alarm system.

In accordance with EN 12056-4 section 5.1, it has a built-in automatic spare pump or a double attachment included, which ensures that sewage drainage is not interrupted.

Suspend control unit in a dry room

Mechanical accessory
Code No.
1
Swing-type check valve
R32 EN 12050-4 1¼“ (DN 32), PN 4 90x90 (HxB) JP09739
2
Stop valve
1¼“ (DN 32), PN 16 110x60 (HxB) JP44785
brass, 1½“ (DN 40), PN 16 125x60 (HxB) JP44786
Ball valve 1¼", PVC, for aggressive media 105x155 (HxB) JP46111
3
Elastic connection
1¼“ (DN 32), PN 3 100x42 (HxD) JP44773
4
Hose band clamp
1¼“ JP44765
5
Hose coupling
Hose coupling 1¼“ (DN 32) brass, for transportable use JP00327
6
Hose set
1 1/4" (DN32), 15 m PVC hose c/w elbow JP43550
7
Special float
for lower switching points JP44795
for narrow chambers (mind. 30x30 od Ø30 cm) JP40856
8
Connection kit
DN 32, with telescopable pressure pipe 30-90 cm JP44609
Electrical accessory
Code No.
a
Alarm unit
AG3 subm. ball contact switch, mains dependent, potential-free contact,3 m cable JP44891
AG10 subm. ball contact switch, mains dependent, potential-free contact, 9.5 m cable JP44892
b
Washing machine stop
AW3 subm. ball contact switch, mains dependent, 3 m cable JP44895
f
Rechargeable battery
9 V, for mains independent alarm JP44850
g
Smart Home
FTJP radio transmitter JP47209

Mindig jól informált!

Iratkozzon fel hírlevelünkre


Közvetlen kapcsolat

Jung Pumpen GmbH

hu.jp@pentair.com

Ferenc Besenyei Farkas

Fon: +36 30 346 5605
Magyarországi Közvetlen Kereskedelmi Képviselet, Andrássy út 121
1133 Budapest, Hungary

JUNG PUMPEN GmbH

Industriestraße 4-6
33803 Steinhagen
Germany
Fon +49 5204 17-0
E-Mail info@jung-pumpen.de