COMPLI 1100 E | Jung Pumpen
Drena-Line Sewage lifting station

COMPLI 1100 E

  • Ready to connect
  • Submersible
  • Additional vertical/horizontal inlets
  • Duplex swing-type check valve
  • Light weight
  • PE-tank
  • Vortex impeller
  • Less required space
  • Smart home compatible
NEW

The sewage lifting unit compli 1100 E is designed for the use in multi-family areas and in commercial buildings. Special attention was given to convenient handling and space-saving and uncomplicated installation.
The submersible unit offers the installation and operation in flood prone areas. The control unit must be installed a well ventilated and flood-proof room.
The high-grade PE tank has freely accessible connections, an overhead cleaning opening and an inlet socket for an easy installation. On grounds of the various connecting options the units fit ideally in all sites. The inlet height can be adjusted infinitely between 180 and 250 mm.
The high-performance single-phase a.c. motors of the duplex unit rest on grey iron rings which provide together with the integrated hydraulic an outstanding rigidity and quietness.
The two pumps operate alternating but can also work in parallel should a peak load occur or a stand by operation be necessary.
The FTJP radio transmitter can be connected to the potential-free contact of the control unit. It is now possible to monitor (e.g. the alarm message) with an EnOcean-capable smart home gateway (Wibutler, Afriso, Homee).

Scope of supply

Ready for plug in sewage lifting unit according to EN 12050 with vertically adjustable inlet socket DN 100 (inlet heights 180 to 250 mm), additional inlets DN 100/50 horizontal and vertical, two built-on subm. sewage pumps and connecting flange DN 80 with pipe flange outer Ø 90 mm, pre-installed DN 80 duplex non-return valve, elastic connection c/w hose clamps for plastic pressure pipe DN 80 and a slip-on-sleeve for the DN 70 ventilation pipe, automatic level control, control unit (degree of protection IP 44), alternating pump operation including peak load function, motor protection, contactors, transformer, mains-dependent alarm system, potential-free NO contact for collective failure messages, optical display of alarm and operation, 2 Hand -0-Automatic switches.
Cable length between tank and control unit 4 m. Supply cable with plug: 1,5 m.

Specifications can be changed without notice. Performance subject to ISO 9906 tolerances.

The minimum flow velocity in the pressure piping must be 0.7 m/s according to EN 12056.
This data is represented in the performance curve as a limit of application.

1 results

TypeCode No.
JP50087

总是消息灵通!

订阅我们的通讯


中国区联系方式

PENTAIR JUNG PUMPEN

上海市延安西路1118号龙之梦大厦19楼
200052

电话: 4008206671; 021-52507888
邮箱: cn.jp@pentair.com

JUNG PUMPEN GmbH

Industriestraße 4-6
33803 Steinhagen
Germany
Fon +49 5204 17-0
E-Mail info@jung-pumpen.de