COMPLI 1200 HL | Jung Pumpen
Sewage lifting stations

COMPLI 1200 HL

Duplex lifting station for several residential units with a storage volume
of approx. 350 litres

Areas of application: Commercial enterprises, hospitals, hotels or apartment buildings
5-year warranty for specialist tradesmen when registered
at www.hauptsachejung.de/en
Made in Germany

  • With modern HighLogo microprocessor control unit
  • Ready to connect
  • Submersible
  • Height-variable inlet
  • Duplex swing-type check valve
  • PE-tank 350 l
  • Smart home compatible

With their performance graduations, the Compli 1200 lifting stations has been designed for larger storage capacities, if wastewater of several residential units or wastewater from commercial enterprises, for example, have to be disposed of. During the design work, special attention was given to easy handling, space-saving and uncomplicated installation.
A fitting (to be provided by the customer) can be used at the rear inlet port of the stage housing to mount the unit variably in height (560 to 700 mm) as well as capable of rotating (180 °).
The submergible unit is permitted for general use in areas subject to flooding without requiring additional outlay. The control unit has to be fitted in a well ventilated flood-proof room.
The construction with PE tank has freely accessible drains and a clamp-type inlet flange for easy installation. The top-mounted cleaning opening and the easy replaceability of the pre-mounted pumps also ensure time-saving servicing. Duplex systems have two pump units on one tank which are switched alternately or, if required, they are operated both in order to cope with peak load or reserve operation. This automatic switching sequence increase safety in particular for use in commercial or public buildings and is always required in keeping with German/European standard EN 12056-4, when the wastewater inflow must not be interrupted.
The sewage lifting stations are available with modern microprocessor control units (HighLogo). The control can be configured intuitively and flexibly via the large graphic display in conjunction with the multifunction button. With optional accessories (GSM modem), SMS or e-mail transmission is also possible in the case of a malfunction.
The Compli sewage lifting station can be integrated into a smart infrastructure. The FTJP radio transmitter is connected to the potential-free contact of the lifting station. It is now possible to transmit the switching status (e. g. an alarm message) to an EnOcean-capable smart home gateway (Wibutler, Afriso, Homee).

Scope of supply

Ready-to-connect sewage disposal unit in keeping with German/European standard EN 12050 with DN 150 clamp-type inlet flange, pre-mounted submersible pump (two pumps in duplex system) and DN 80 connecting flange with pipe unit. Ø110, reducer ring Ø 110 to Ø 90, pre-mounted duplex swing-type checke valve, one elastic connection each with clamps for plastic pressure pipe and ventilation pipe, automatic level control. Control unit (IP 44 type of protection) with motor protection, contactors, transformer, mains-dependent alarm system and potential noc-contact for collective failure messages, with optical display of sense of rotation, alarm and operation as well as two manual-0-automatic switch. With automatic changeover system and peak load function and further functions such as operating hours counter and maintenance interval display.
Cable: between tank and control 4 m, between control and plug 1.5 m.

Technical data
Delivery head Hmax
20 m
Flow rate Qmax
85 m³/h
Free passage
70 mm
Pressure outlet
DN 80

Specifications can be changed without notice. Performance subject to ISO 9906 tolerances.

The minimum flow velocity in the pressure piping must be 0.7 m/s according to EN 12056.
This data is represented in the performance curve as a limit of application.

5 results

TypeCode No.Motor rating P1Motor rating P2CurrentPlugOil chamberImpeller
JP50118
1.25 kW
0.87 kW
2.2 A
CEE-16A
No
Vortex impeller, GFK
JP50119
2.2 kW
1.7 kW
3.9 A
CEE-16A
No
Vortex impeller, GFK
JP50120
3 kW
2.2 kW
5.1 A
CEE-16A
No
Vortex impeller, GFK
JP50121
3.3 kW
2.6 kW
5.4 A
CEE-16A
Yes
Vortex impeller, grey cast iron
JP50122
4.8 kW
4 kW
8.2 A
CEE-32A
Yes
Vortex impeller, grey cast iron

总是消息灵通!

订阅我们的通讯


中国区联系方式

PENTAIR JUNG PUMPEN

上海市延安西路1118号龙之梦大厦19楼
200052

电话: 4008206671; 021-52507888
邮箱: cn.jp@pentair.com

JUNG PUMPEN GmbH

Industriestraße 4-6
33803 Steinhagen
Germany
Fon +49 5204 17-0
E-Mail info@jung-pumpen.de