COMPLI 1500/2500 HL | Jung Pumpen
Sewage lifting stations

COMPLI 1500/2500 HL

Duplex lifting station for municipal and industrial applications

Large storage volume of up to 1,000 litres
5-year warranty for specialist tradesmen when registered
at www.hauptsachejung.de/en
Made in Germany

  • With modern HighLogo microprocessor control unit
  • Submersible
  • Large storage capacity
  • Selectable inlet position
  • PE-tank 500/1000 l
  • Smart home compatible

The Compli 1500 and 2500 tank systems have been designed for large industrial and communal wastewater volumes as well as for the connection of streets or other community effluent systems. To ensure a practical arrangement, special importance was attached to easy installation.
The submersible unit is permitted for general use in areas subject to flooding without requiring additional outlay. The control unit has to be fitted in a well ventilated flood-proof room.
The construction with PE tanks has freely accessible drains and a clamp-type inlet flange for easy installation. The top-mounted cleaning opening and the easy replaceability of the pre-mounted pumps also ensure time-saving servicing.
The sewage lifting stations are available with modern microprocessor control units (HighLogo). The control can be configured intuitively and flexibly via the large graphic display in conjunction with the multifunction button. With optional accessories (GSM modem), SMS or e-mail transmission is also possible in the case of a malfunction.
The Compli sewage lifting station can be integrated into a smart infrastructure. The FTJP radio transmitter is connected to the potential-free contact of the lifting station. It is now possible to transmit the switching status (e. g. an alarm message) to an EnOcean-capable smart home gateway (Wibutler, Afriso, Homee).

Technical data
Delivery head Hmax
50 m
Flow rate Qmax
100 m³/h
Free passage
70 mm
Pressure outlet
DN 100

Specifications can be changed without notice. Performance subject to ISO 9906 tolerances.

The minimum flow velocity in the pressure piping must be 0.7 m/s according to EN 12056.
This data is represented in the performance curve as a limit of application.

20 results

TypeCode No.Motor rating P1Motor rating P2CurrentFree passagePressure outlet
JP50123
2.4 kW
1.9 kW
4.2 A
100 mm
DN 100
JP50124
3.5 kW
2.65 kW
6.9 A
100 mm
DN 100
JP50125
5.8 kW
4.65 kW
10.2 A
5.9 A
100 mm
DN 100
JP50127
7.2 kW
5.9 kW
12.8 A
7.4 A
70 mm
DN 100
JP50126
7.2 kW
5.9 kW
12.8 A
7.4 A
100 mm
DN 100
JP50133
2.4 kW
1.9 kW
4.2 A
100 mm
DN 100
JP50134
3.5 kW
2.65 kW
6.9 A
100 mm
DN 100
JP50135
5.8 kW
4.65 kW
10.2 A
5.9 A
100 mm
DN 100
JP50137
7.2 kW
5.9 kW
12.8 A
7.4 A
70 mm
DN 100
JP50136
7.2 kW
5.9 kW
12.8 A
7.4 A
100 mm
DN 100
JP50128
3.7 kW
3.04 kW
6.6 A
70 mm
DN 80
JP50129
5.2 kW
4.45 kW
8.7 A
5 A
70 mm
DN 80
JP50130
7.7 kW
6.6 kW
13.2 A
7.7 A
70 mm
DN 80
JP50131
10.5 kW
9.2 kW
17.6 A
10.2 A
70 mm
DN 80
JP50132
17.3 kW
15.4 kW
28.8 A
16.7 A
70 mm
DN 100
JP50138
3.7 kW
3.04 kW
6.6 A
70 mm
DN 80
JP50140
7.7 kW
6.6 kW
13.2 A
7.7 A
70 mm
DN 80
JP50139
5.2 kW
4.45 kW
8.7 A
5 A
70 mm
DN 80
JP50141
10.5 kW
9.2 kW
17.6 A
10.2 A
70 mm
DN 80
JP50142
17.3 kW
15.4 kW
28.8 A
16.7 A
70 mm
DN 100

总是消息灵通!

订阅我们的通讯


中国区联系方式

PENTAIR JUNG PUMPEN

上海市延安西路1118号龙之梦大厦19楼
200052

电话: 4008206671; 021-52507888
邮箱: cn.jp@pentair.com

JUNG PUMPEN GmbH

Industriestraße 4-6
33803 Steinhagen
Germany
Fon +49 5204 17-0
E-Mail info@jung-pumpen.de