Sewage lifting stations
COMPLI 300 E
The smallest and lightest sewage lifting station
Perfect as a single unit for the small basement apartment
Ready to plug in for easy installation
5-year warranty for specialist tradesmen when registered
at www.hauptsachejung.de/en
Made in Germany
- Ready to connect
- Submersible
- Auxiliary inlets vertical/horizontal
- Mounted swing-type check valve
- Light weight
- Less required space
- PE-tank
- Vortex impeller
- Smart home compatible
The Compli 300 E is the smallest sewage lifting station of our Compli series. It has been designed for the disposal of sewage from housing units like basement dwellings. The Compli 300 E is all-purposed, due to compact dimensions of its tank and numerous connection facilities.
The low weight and the plug with integrated control board ensures a facile installation, so that an electrician is not needed to start running the unit.
The submersible unit permits a general application in rooms which could be flooded.
The connector housing with integrated control unit must be installed in rooms which are well ventilated and cannot be flooded.
The powerful alternating current motor of the Compli 300 is based on a rugged grey cast iron volute housing vat which grant a special stability and quiet running.
The Compli sewage lifting station can be integrated into a smart infrastructure. The FTJP radio transmitter is connected to the potential-free contact of the lifting station. It is now possible to transmit the switching status (e.g. an alarm message) to an EnOcean-capable smart home gateway (Wibutler, Afriso, Homee).
Ready to connect sewage disposal unit acc. to EN 12050-1with clamp flange DN 100 for inlet height 180 mm, additional inlets DN 100/50 horizontal and vertical, submersible pump and flange DN 80 with piece of pipe Ø 90 mm, with integrated swing-type check valve DN 80, one elastic connection hose band clamps for plastic pipe DN 80 and for pressure pipe DN 70, autom. level control, control unit (type of enclosure IP 44) with mains-dependent alarm buzzer, stand-by LED, hand-0-automatic selector switch and potential free NO contact for an additional alarm. Cable 4 m.
| Delivery head Hmax | 10 m |
| Flow rate Qmax | 30 m³/h |
| Free passage | 50 mm |
| Pressure outlet | DN 80 |
Specifications can be changed without notice. Performance subject to ISO 9906 tolerances.
The minimum flow velocity in the pressure piping must be 0.7 m/s according to EN 12056.
This data is represented in the performance curve as a limit of application.
1 results
| Type | Code No. |
|---|---|
JP50076 |