Compli 508/2 ME | Jung Pumpen

Compli 508/2 ME

JP50096

Mechanical data
Pump	Vertical single-stage
Free passage	7 mm
Pressure pipe	DN 40
Bearing	Ball bearings, grease-lubricated
Oil chamber	Yes
Run dry protection	Yes
Shaft	voll gegen Medium abgedeckt
Impeller	Vortex impeller, GFK
Motor housing	Grey cast iron
Pump housing	Grey cast iron
Submersible	Yes
Pressure outlet	DN 40
Tank capacity	117 l
Weight	50 kg

Electrical data
Voltage	1/N/PE~230 V
Motor rating P1	1.7 kW
Motor rating P2	1.14 kW
Current	7.5 A
Wires	6G1,5
Type of enclosure	IP 68
Insulation class	F
Winding thermostat	Yes
Plug	Safety

Performance
Delivery head H [m]	2	4	6	8	10	12	14
Flow rate Q [m³/h]	17	16	14	12	9	7	4

Specifications can be changed without notice. Performance subject to ISO 9906 tolerances.

The minimum flow velocity in the pressure piping must be 0.7 m/s according to EN 12056.
This data is represented in the performance curve as a limit of application.

Dimensions compli 100 M (mm)

Dimensions compli 500 M (mm)

Dimensions compli 1000 M (mm)

Example of installation compli 100

Example of installation compli 500 / 1000

Example of installation compli 1000


				Code No.
1	Inlet gate valve PVC
		with two pipe sockets, DN 150, PN2.5	660x450 (HxW)	JP28591
3	Stop valve
		brass, 1½“ (DN 40), PN 16	125x60 (HxB)	JP44786
4	Hand diaphragm pump
		for emergency purposes (up to Hgeo 15 m)	640x1½” (HxD)	JP00255
5	Elastic connection
		+ Hose band clamps, 1½“ (DN 40), PN 4	120x50 (HxD)	JP50902
6	Closing set
		DN 150, required for lateral connection		JP43156


			Code No.
a	Rechargeable battery
		9 V, for mains independent alarm	JP44850
b	Seal leak detector
		DKG (für die Ölkammer)	JP44900
c	Smart Home
		FTJP radio transmitter	JP47209