Drainageset
JP43388| Mechanical data | |
|---|---|
| Pump | Vertical single-stage |
| Free passage | 10 mm |
| Bearing | Ball bearings, grease-lubricated |
| Seal on motor side | Rotary shaft seal |
| Oil chamber | Yes |
| Seal on medium side | SiC mechanical seal |
| Run dry protection | Yes |
| Shaft | Stainless steel |
| Impeller | Vortex impeller, GFK |
| Motor housing | Stainless steel |
| Submersible | Yes |
| Mounted circuit | Yes |
| Pressure outlet | 1 1/4" |
| Weight | 9 kg |
| Electrical data | |
|---|---|
| Voltage | 1/N/PE~230 V |
| Motor rating P1 | 0.75 kW |
| Motor rating P2 | 0.49 kW |
| Current | 3.3 A |
| Power line | 20m S07RN-F |
| Wires | 4G0,75 |
| Type of enclosure | IP 68 |
| Insulation class | B |
| Winding thermostat | Yes |
| Motor protection | Integrated |
| Plug | Safety |
| Performance | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Delivery head H [m] | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
| Flow rate Q [m³/h] | 15,5 | 14 | 12,5 | 11 | 9 | 7,5 | 5,5 | 3,5 | 1,5 |
Specifications can be changed without notice. Performance subject to ISO 9906 tolerances.
The minimum flow velocity in the pressure piping must be 0.7 m/s according to EN 12056.
This data is represented in the performance curve as a limit of application.
Dimensions and switching points Drainage Set (mm)
Example of installation with hose set
| Mechanical accessory | ||||||
|---|---|---|---|---|---|---|
| Code No. | ||||||
 | Hose set | |||||
| 1 1/4" (DN32), 15 m PVC hose c/w elbow | JP43550 | |||||
| Electrical accessory | ||||||
|---|---|---|---|---|---|---|
| Code No. | ||||||
| Alarm unit | |||||
| AG20 | Subm. ball contact switch, mains dependent, potential-free contact, 20 m cable | JP48851 | ||||
| Rechargeable battery | |||||
| 9 V, for mains independent alarm | JP44850 | |||||