HIGHLOGO 1-25 LC
JP47984| Mechanical data | |
|---|---|
| Type | Single units with pressure switches and tube set (10 m ) and DRP |
| HxWxL[mm] | 275 x 250 x 155 |
| Weight | 4 kg |
| Main switch | No |
| Electrical data | |
|---|---|
| Pump voltage | 3/N/PE~400 V |
| Motor protection | 2.4 ... 4 A |
| Pre-fuse | 16 A |
| Type of enclosure | IP 44 |
| Alarm buzzer | Yes |
| Connection 9V battery | Yes |
| Connection thermal contact | Yes |
| Connection dry run protection | Yes |
| Display operation hours/switching cycles | Yes |
| Display amps | Yes |
| Automatic alternate operation | No |
| Automatic test run | Yes |
| Digital signal contact | optinoal |
| Input AUX | Yes |
| Input level control | digital and analog |
| Switch off delay after power outage | Yes |
| Event memory | Yes |
| Integrated GSM-Modem | optinoal |
| Run time monitoring | Yes |
| Max. switching power | 4 kW |
| Motor protection typ | Overload rely |
| Stop time for pump operation | Yes |
| Peak load operation | No |
| Start | direct |
| Fault contact pot. Free | 2 changeover contacts, 5A |
Equipment HighLogo LC
Equipment HighLogo LCX/LCSX
| Mechanical accessory | ||||||
|---|---|---|---|---|---|---|
| Code No. | ||||||
 | Retaining plate | |||||
| for air bells (in concrete sumps from Ø 1 m) | JP50213 | |||||
| Electrical accessory | ||||||
|---|---|---|---|---|---|---|
| Code No. | ||||||
| Rechargeable battery | |||||
| 9 V, for mains independent alarm | JP44850 | |||||
| Pre-mounted accessory | |||||
| Modem GSM for HighLogo | factory fitted, incl. flat antenna | JP49356 | ||||
| Parametrization GSM modul | pre-setting for customer demand | JP55202 | ||||
| GSM battery fpr HighLogo 1 | 12V, for single unit, factory fitted | JP25884 | ||||
| Retrofittable accessory | |||||
| CEE-Plug 16A | 1.5 m cable | JP50816 | ||||
| Modem GSM for HighLogo | retrofit unit incl. GSM antenna | JP50444 | ||||
| Battery 12V with housing | retrofit unit for independent modem operation | JP50635 | ||||