U5K, 10 m cable | Jung Pumpen

U5K, 10 m cable

JP09386

Mechanical data
Pump	Vertical single-stage
Free passage	20 mm
Bearing	Ball bearings, grease-lubricated
Seal on motor side	Rotary shaft seal
Oil chamber	Yes
Seal on medium side	2-fold rotary shaft seals
Run dry protection	Yes
Shaft	Stainless steel
Impeller	Vortex impeller, GFK
Motor housing	Stainless steel
Pump housing	GRP
Submersible	Yes
Pressure outlet	1 1/4"
Weight	4.7 kg

Electrical data
Ciruit	Without level control
Voltage	1/N/PE~230 V
Motor rating P1	0.52 kW
Motor rating P2	0.38 kW
Current	2.3 A
Power line	10m H05RN-F
Wires	3G0,75
Type of enclosure	IP 68
Insulation class	B
Winding thermostat	Yes
Motor protection	Integrated
Plug	Safety

Performance
Delivery head H [m]	1	2	3	4	5	6	7
Flow rate Q [m³/h]	11.5	10.5	9	7.5	6.5	4.5	2.5

Specifications can be changed without notice. Performance subject to ISO 9906 tolerances.

The minimum flow velocity in the pressure piping must be 0.7 m/s according to EN 12056.
This data is represented in the performance curve as a limit of application.

Dimensions and switching points U5KS (mm)

Dimensions and switching points special float switch (mm)

Dimensions and switching points float switch (mm)

Dimensions and switching points GR 32 (mm)

Example of single pump installation with GR

Example of duplex installation

Example of installation and dimensions Easyfix 32 Single (mm)

Example of installation and dimensions Easyfix 32 Duo (mm)

Single unit with GR: sump area min. 40x50 cm or Ø 50 cm
Single unit without GR: sump area min. 40x40 cm or Ø 40 cm

Duplex unit with GR: sump area min. 50x50 cm, Ø 60 cm
Duplex unit without GR: sump area min. 50x50, Ø 55 cm

Single unit Easyfix 32 Single: sump min. 30x40 cm, Ø 40 cm
Duplex unit Easyfix 32 Duo: sump min. 50x40 cm, Ø 55 cm
Duplex unit Easyfix 32 Duo with special float: sump min. 50x50 cm Ø 70 cm

In case of installation beneath the backpressure level the pressure tube must be taken in a loop over the local backup level acc. to EN 12056. Besides, it must be secured with an EN 12050-4-proofed swing-type check valve. Additionally we recommend an alarm system.

In accordance with EN 12056-4 section 5.1, it has a built-in automatic spare pump or a double attachment included, which ensures that sewage drainage is not interrupted.

Suspend control unit in a dry room


				Code No.
1	Swing-type check valve
	R32 EN 12050-4	1¼“ (DN 32), PN 4	90x90 (HxB)	JP09739
	DR 40 EN 12050-4	1½“ (DN 40), PN 4	200x280 (HxB)	JP09155
	Rubber flap DN32	for transportable use	35x35 (HxB)	JP50774
2	Stop valve
		1¼“ (DN 32), PN 16	110x60 (HxB)	JP44785
		brass, 1½“ (DN 40), PN 16	125x60 (HxB)	JP44786
3	Elastic connection
		+ Hose band clamps, 1¼“ (DN 32), PN 3	100x42 (HxD)	JP50901
4	Hose coupling
	Hose coupling	1¼“ (DN 25) brass, for transportable use		JP50849
	Coupling Storz C	1 1/4" male thread		JP44780
	Coupling wrench			JP25708
5	Pressure hose
		15 m, synthetic, Ø 25 mm		JP50830
		12,5 m, synthetic, with coupling Storz C, Ø 38 mm		JP50298
	House connection	1¼“ – 38/32/25		JP44209
6	Hose set
		1 1/4" (DN32), 15 m PVC hose c/w elbow		JP43550
8	Guide rail system
		GR 32		JP44000
	Support for guide rail extension	ex 2 m sump depth, per m 1 piece		JP28314
9	Connection kit
		DN 32, with telescopable pressure pipe 30-90 cm		JP44609


			Code No.
a	Washing machine stop
	AW3	subm. ball contact switch, mains dependent, 3 m cable	JP44895
b	Control for duplex units
	Control unit HIGHLOGO 2-00 E	230 V	JP47996
	Control unit BD 00 E	230 V, for pumps U3-U6, US 62-105, UV3, UV 300, 08/2 ME	JP45735
	Level control
	Subm. switch pack B	3 subm. ball contact switch with 9.5 m and fixing devices	JP16725
	Subm. switch pack BmG	3 subm. ball contact switch with 9.5 m and counterweight	JP16726
c	Rechargeable battery
		9 V, for mains independent alarm	JP44850
d	Smart Home
		FTJP radio transmitter	JP47209