UB 152 DS
JP09440| Mechanical data | |
|---|---|
| Pump | Vertical single-stage |
| Free passage | 10 mm |
| Bearing | Ball bearings, grease-lubricated |
| Seal on motor side | Duplex rotary shaft seals |
| Oil chamber | Yes |
| Seal on medium side | SiC mechanical seal |
| Run dry protection | Yes |
| Shaft | Stainless steel |
| Impeller | Vortex impeller, GFK |
| Motor housing | Stainless steel |
| Pump housing | Grey cast iron |
| Submersible | Yes |
| Pressure outlet | Fixed coupling C |
| Weight | 17.9 kg |
| Electrical data | |
|---|---|
| Ciruit | With built-in level control |
| Voltage | 3/PE~400 V |
| Motor rating P1 | 1.7 kW |
| Motor rating P2 | 1.41 kW |
| Current | 3.1 A |
| Power line | 10m H07RN-F |
| Wires | 4G1,0 |
| Type of enclosure | IP 68 |
| Insulation class | B |
| Winding thermostat | Yes |
| Motor protection | Integrated |
| Plug | CEE |
| Performance | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Delivery head H [m] | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 |
| Flow rate Q [m³/h] | 27 | 25 | 24 | 22 | 20 | 19 | 17 | 15 | 13 | 11 | 9 | 7 | 5 | 2 |
Specifications can be changed without notice. Performance subject to ISO 9906 tolerances.
The minimum flow velocity in the pressure piping must be 0.7 m/s according to EN 12056.
This data is represented in the performance curve as a limit of application.
VDE/GS-Certification for UB 62 ES, US 102 ES
Dimensions UB 62 up to UB 152 (mm)
Dimensions UB 251 (mm)
Example of installation UB 251 DS
| Mechanical accessory | ||||||
|---|---|---|---|---|---|---|
| Code No. | ||||||
| Pressure hose | ||||||
| 15 m, synthetic, with coupling Storz C, Ø 52 mm | JP00336 | |||||
| Hose coupling | ||||||
| Coupling wrench | JP25708 | |||||
 | Chain | |||||
| certified, 2.5 m, 320 kg, 5 rings (EN 818 mod.) | JP45901 | |||||
| certified, 5.0 m, 320 kg, 8 rings (EN 818 mod.) | JP45902 | |||||
| Webbing | ||||||
| with shackle | JP45168 | |||||