Drena-Line Sewage lifting station
COMPLI 310 E
- Ready to connect
- Submersible
- Auxiliary inlets vertical/horizontal
- Mounted swing-type check valve
- Light weight
- Less required space
- PE-tank
- Vortex impeller
- Smart home compatible
The compli 310 E is the smallest sewage lifting station of our compli series. It has been designed for the disposal of sewage from housing units like basement dwellings. The compli 310 E is all-purposed, due to compact dimensions of its tank and numerous connection facilities.
The low weight and the plug with integrated control board ensures a facile installation, so that an electrician is not needed to start running the unit.
The submersible unit permits a general application in rooms which could be flooded.
The connector housing with integrated control unit must be installed in rooms which are well ventilated and cannot be flooded.
The powerful alternating current motor of the compli 310 E is based on a rugged grey cast iron volute housing vat which grant a special stability and quiet running.
Ready to connect sewage disposal unit acc. to EN 12050-1 with clamp flange DN 100 for inlet height 180 mm, additional inlets DN 100/50 horizontal and vertical, submersible pump and flange DN 80 with piece of pipe Ø 90 mm, with integrated swing-type check valve DN 80, one elastic connection hose band clamps for plastic pipe DN 80 and for pressure pipe DN 70, autom. level control, control unit (type of enclosure IP 44) with mains-dependent alarm buzzer, stand-by LED, hand-0-automatic selector switch and potential free NO contact for an additional alarm.
Specifications can be changed without notice. Performance subject to ISO 9906 tolerances.
The minimum flow velocity in the pressure piping must be 0.7 m/s according to EN 12056.
This data is represented in the performance curve as a limit of application.
1 results
| Type | Code No. |
|---|---|
JP50077 |