Multidrain UV3 | Jung Pumpen
Submersible drainage pumps

Multidrain UV3

First choice for mobile applications

High-quality stainless steel design
Ideal for narrow shafts
70 degrees media temperature (10 min.)

  • High quality stainless steel design
  • Especially suitable for mobile use
  • 10 mm free passage
  • Cooling jacket for motor housing
  • Discharge branch vertical 1 1/4"
  • Flushing device
  • Self ventilation
  • Moisture sealed cable inlet
  • Fluid temperature 35 °C, temporarily 70 °C (10 min.)

The Multidrain UV3 is a versatile submersible drainage pump made of stainless steel for portable and stationary use. It pumps rainwater, lightly submersible polluted water and domestic wastewater from e.g. household dishwashers or washing machines (also high temperature).
An easy-to-activate flushing device to reduce deposits in the pump sump ensures trouble-free operation and facilitates maintenance.
Motor jacket cooling ensures submerged operation without the risk of overheating. In case of dry running, the thermal motor protection switches off the pump before reaching a critical temperature. These protective measures, plus the swing-type check valve and a hose connection included in the scope of delivery, make the Multidrain UV3 a perfect pump for mobile applications.
In stationary use, the Multidrain UV3 S with automatic switch removes water from drainage shafts in cellars, washing basements or storage rooms and serves as a backflow protection. If the shaft or container should runs dry temporarily, air cushions can escape through the ventilation opening. When the strainer base is removed, the pump removes the water down to a level of 5 mm.
If submersible pumps are used outdoors, only a pump with 10 m cable without extension cable may be used in accordance with VDE Regulation 0100. For construction sites and garden ponds, a H07-type cable must be used.

Scope of supply

Pump ready to connect according EN 12050 with vertical discharge, 11/4" female connection elbow, cable and plug, swing-type check valve for mobile use, graded hose connection 1¼“ – 38/32/25,float fixation, locking plug (UV3S/3SF) S model with automatic level float switch.

Specifications can be changed without notice. Performance subject to ISO 9906 tolerances.

The minimum flow velocity in the pressure piping must be 0.7 m/s according to EN 12056.
This data is represented in the performance curve as a limit of application.

4 results

TypeCode No.CiruitPower line
JP50248
Without level control
10m H05RN-F
JP50249
With built-in level control
4m H05RN-F
JP50312
With built-in level control
10m H07RN-F
JP50313
With built-in level control
10m H07RN-F

Mindig jól informált!

Iratkozzon fel hírlevelünkre


Közvetlen kapcsolat

Jung Pumpen GmbH

hu.jp@pentair.com

Ferenc Besenyei Farkas

Fon: +36 30 346 5605
Magyarországi Közvetlen Kereskedelmi Képviselet, Andrássy út 121
1133 Budapest, Hungary

JUNG PUMPEN GmbH

Industriestraße 4-6
33803 Steinhagen
Germany
Fon +49 5204 17-0
E-Mail info@jung-pumpen.de