MultiStream 100/4 C5, Ex
JP09276| Mechanical data | |
|---|---|
| Pump | Vertical single-stage |
| Ex-proof | With ex-proof |
| Free passage | 100 mm |
| Bearing | Ball bearings, grease-lubricated |
| Seal on motor side | Duplex shaft seal, from 55/: mechanical seal |
| Oil chamber | Yes |
| Seal on medium side | SiC mechanical seal |
| Run dry protection | Yes |
| Impeller | Channel impeller, grey cast iron from 55/2... spheroidal grapfite iron |
| Motor housing | Grey cast iron |
| Pump housing | Grey cast iron |
| Submersible | Yes |
| Pressure outlet | DN 100 |
| Weight | 138 kg |
| Electrical data | |
|---|---|
| Voltage | 3/PE~400/690 V |
| Motor rating P1 | 9.5 kW |
| Motor rating P2 | 7.94 kW |
| Current | 17.2 A 10 A |
| Power line | 10m H07RN-F |
| Wires | 10G2,5 |
| Type of enclosure | IP 68 |
| Fuse | 25 A |
| S3 | 25 % |
| Performance | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Delivery head H [m] | 1 | 3 | 5 | 7 | 9 | 12 | 14 | 16 | 18 | 20 | 23 |
| Flow rate Q [m³/h] | 260 | 247 | 228 | 207 | 182 | 142 | 114 | 89 | 65 | 40 | 9 |
Specifications can be changed without notice. Performance subject to ISO 9906 tolerances.
The minimum flow rate in the pressure pipe of v = 0,7 m/s is marked in the Q-H-diagram (operative limit).
Dimensions guide rail system
Dimensions pump base
Discharge outlet
| Mounting arrangement with guide rail system | |
|---|---|
| GR | 101 |
| DN | 100 |
| A | 825 mm |
| B | 645 mm |
| C | 230 mm |
| D | 180 mm |
| E | 625 mm |
| F | 865 mm |
| G | 480 mm |
| H | 125 mm |
| J | 315 mm |
| K | 110 mm |
| L | 55 mm |
| M | 82 mm |
| N | 1" |
| O | 345 mm |
| P | 175 mm |
| Q | 385 mm |
| Mounting arrangement with base | |
|---|---|
| DN | 100 |
| A | 835 mm |
| B | 480 mm |
| C | 230 mm |
| D | 195 mm |
| E | 240 mm |
| F | 320 mm |
| G | 230 mm |
| K | 180 mm |
| L | 18 mm |
| N | 8 |
Example of installation guide rail system
Additional requirements, see technical data control units
| Mechanical accessory | ||||||
|---|---|---|---|---|---|---|
| Code No. | ||||||
 | Chain | |||||
| certified, 2.5 m, 320 kg, 5 rings (EN 818 mod.) | JP45901 | |||||
| certified, 5.0 m, 320 kg, 8 rings (EN 818 mod.) | JP45902 | |||||
| certified, 7.5 m, 320 kg, 11 rings (EN 818 mod.) | JP47365 | |||||
| Shackle, certified, 630 kg, stainless steel | JP45904 | |||||
| Pump hanging (08 Ex - 100...) | JP45925 | |||||
| Guide rail system | |||||
| GR 101 | DN 100, 235x254x345 (AxBxH) | JP21037 | ||||
| Swing-type check valve | |||||
| R 101 EN 12050-4 | DN 100, PN 4, flange PN 10, EN 558, 300 (H) | JP00325 | ||||
| R 100 G EN 12050-4 | DN 100, PN 4, flange PN 10, EN 558, with counter weight, 300(H) | JP00324 | ||||
| Sluice valve | |||||
| DN 100, PN 10, EN 1171 | 345x190 (HxB) | JP00329 | ||||
| Flanged spigot | |||||
| DN 100 PN 10, F-KS | 153x110 (HxD) | JP08673 | ||||
| DN 100 PN 10, F-piece | 100x114 (HxD) | JP00688 | ||||
| Elastic connection | |||||
| + Clamps, 2“ DN 100, PN 4 | 200x110 (HxD) | JP50905 | ||||
| + Clamps ,2“ DN 100, PN 4 | 200x114 (HxD) | JP50906 | ||||
| Flanged Y-pipe | |||||
| DN 100/100/100 | 355x480(HxB), PN 10 | JP00203 | ||||
| Pump base | |||||
| C 275, for B5,B6,C1,C5,BW2,CW3 | 145x385 (HxB) | JP00685 | ||||
| Flanged connection | |||||
| C 100 (similar Q-piece 90°), DN 100 PN10/PN6 | 175x120 (HxB) | JP00579 | ||||
| Flushing tube | |||||
| Type II | 55/... - 100/... | JP28222 | ||||