Sewage lifting stations
COMPLI 1000/1000 HL
Duplex lifting station for commercial use
Areas of application: Gastronomy, industry or apartment buildings
5-year warranty for specialist tradesmen when registered
at www.hauptsachejung.de/en
Made in Germany
- With modern HighLogo microprocessor control unit
- Ready to connect
- Submersible
- Duplex swing-type check valve
- Versatile connection facilities
- PE-tank 117 l
- Vortex impeller
- Smart home compatible
With their performance graduations, the Compli 1000 and Compli 1000 HL disposal units have been designed for use in detached houses, in several residential units or in commercial buildings. During the design work, special attention was given to easy handling, space-saving and uncomplicated installation. The submersible unit is permitted for general use in areas subject to flooding. The control unit has to be fitted in a well ventilated flood-proof room. The PE tank has freely accessible drains, a cleaning opening at the top and a clamp-type inlet flange for an installation. For the connection of a DN 100 feeding pipe a reducer DN 150/100 is enclosed. The tank has vertical inlet in DN 150 or DN 100. If not in use, the rear inlet must be closed with the plug set DN 150 (accessory). The vortex impeller of the pump with a70 mm free passage offers the safety you can rely on. Duplex systems have two pump units on one tank which are switched alternately or, if required, they are operated both in order to cope with peak load or reserve operation. The Compli lifting stations are available with modern microprocessor control unit (HighLogo). Via the large graphic display in conjunction with the multifunctional button the control system can be configured intuitively and flexibly. With optional accessories (GSM modem), SMS or e-mail transmission is also possible in the event of a malfunction. The Compli sewage lifting station can be integrated into a smart infrastructure. The FTJP radio transmitter is connected to the potential-free contact of the lifting station. It is now possible to transmit the switching status (e. g. an alarm message) to an EnOcean-capable smart home gateway (Wibutler, Afriso, Homee).
Ready for plug in sewage lifting unit according to EN 12050-1 with clamp flange DN 150, reducer DN 150/100, two built-on subm. sewage pumps and connection flange DN 80 with pipe socket Ø 110 mm, reducer ring Ø 110 up to Ø 90, elastic connection c/w hose clamps, PVC collar DN 70 for ventilation connection, pre-mounted duplex swing-type check valve and autom. level controller, control unit (IP 44) c/w motor protection, motor contactor, transformer, mains-dependent alarm unit and potential noc-contact for collective failure messages, with optical display of sense of rotation (only in case of three-phase current), alarm and operation, and 2 x manual-0-automatic switch. With Highlogo version even more functionalities such as operating hours counter and maintenance interval display.
Cable between tank and control 4 m, cable between control and plug 1.5 m.
Delivery head Hmax | 20 m |
Flow rate Qmax | 85 m³/h |
Free passage | 70 mm |
Pressure outlet | DN 80 |
Specifications can be changed without notice. Performance subject to ISO 9906 tolerances.
The minimum flow velocity in the pressure piping must be 0.7 m/s according to EN 12056.
This data is represented in the performance curve as a limit of application.
12 results
Type | Code No. | Voltage | Motor rating P1 | Motor rating P2 | Current | Plug | Oil chamber | Impeller |
---|---|---|---|---|---|---|---|---|
JP50099 | 1/N/PE~230 V | 1.55 kW | 1.1 kW | 7.1 A | Safety | No | Vortex impeller, GFK | |
JP50100 | 3/N/PE~400 V | 1.25 kW | 0.87 kW | 2.2 A | CEE-16A | No | Vortex impeller, GFK | |
JP50101 | 3/N/PE~400 V | 2.2 kW | 1.7 kW | 3.9 A | CEE-16A | No | Vortex impeller, GFK | |
JP50102 | 3/N/PE~400 V | 3 kW | 2.2 kW | 5.1 A | CEE-16A | No | Vortex impeller, GFK | |
JP50103 | 3/N/PE~400 V | 3.3 kW | 2.6 kW | 5.4 A | CEE-16A | Yes | Vortex impeller, grey cast iron | |
JP50104 | 3/N/PE~400 V | 4.8 kW | 4 kW | 8.2 A | CEE-32A | Yes | Vortex impeller, grey cast iron | |
JP50105 | 1/N/PE~230 V | 1.55 kW | 1.1 kW | 7.1 A | Safety | No | Vortex impeller, GFK | |
JP50106 | 3/N/PE~400 V | 1.25 kW | 0.87 kW | 2.2 A | CEE-16A | No | Vortex impeller, GFK | |
JP50107 | 3/N/PE~400 V | 2.2 kW | 1.7 kW | 3.9 A | CEE-16A | No | Vortex impeller, GFK | |
JP50108 | 3/N/PE~400 V | 3 kW | 2.2 kW | 5.1 A | CEE-16A | No | Vortex impeller, GFK | |
JP50109 | 3/N/PE~400 V | 3.3 kW | 2.6 kW | 5.4 A | CEE-16A | Yes | Vortex impeller, grey cast iron | |
JP50110 | 3/N/PE~400 V | 4.8 kW | 4 kW | 8.2 A | CEE-32A | Yes | Vortex impeller, grey cast iron |