MultiCut 75/2 M
JP50375| Mechanical data | |
|---|---|
| Pump | Vertical single-stage |
| Bearing | Ball bearings, grease-lubricated |
| Seal on motor side | Duplex shaft seal, from 75/2M: mechanical seal |
| Oil chamber | Yes |
| Seal on medium side | SiC mechanical seal |
| Run dry protection | Yes |
| Impeller | Vortex impeller, grey cast iron 20/2 M: GFK |
| Motor housing | Grey cast iron |
| Pump housing | Grey cast iron |
| Submersible | Yes |
| Pressure outlet | DN 32 |
| Weight | 90 kg |
| Electrical data | |
|---|---|
| Voltage | 3/PE~400/690 V |
| Motor rating P1 | 7.7 kW |
| Motor rating P2 | 6.6 kW |
| Current | 13.2 A 7.7 A |
| Power line | 10m H07RN-F |
| Wires | 10G2,5 |
| Type of enclosure | IP 68 |
| Insulation class | F |
| Winding thermostat | Yes |
| Motor protection | Thermostat |
| Fuse | 20 A |
| S3 | 30 % |
| Performance | |||||||
|---|---|---|---|---|---|---|---|
| Delivery head H [m] | 34 | 36 | 38 | 40 | 44 | 46 | 48 |
| Flow rate Q [m³/h] | 17 | 16 | 15 | 13 | 8 | 5 | 2 |
Specifications can be changed without notice. Performance subject to ISO 9906 tolerances.
The minimum flow velocity in the pressure piping must be 0.7 m/s according to EN 12056.
This data is represented in the performance curve as a limit of application.
Dimensions pump base (mm)
Example of guide rail installation (mm)
| Mechanical accessory | ||||||
|---|---|---|---|---|---|---|
| Code No. | ||||||
 | Chain | |||||
| certified, 2.5 m, 320 kg, 5 rings (EN 818 mod.) | JP45901 | |||||
| certified, 5.0 m, 320 kg, 8 rings (EN 818 mod.) | JP45902 | |||||
| certified, 7.5 m, 320 kg, 11 rings (EN 818 mod.) | JP47365 | |||||
| Shackle, certified, 630 kg, stainless steel | JP45904 | |||||
| Pump hanging (08 Ex - 100...) | JP45925 | |||||
| Guide rail system | |||||
| GR 35 | 1 1/2" female thread for MultiCut pumps | JP14094 | ||||
| Dislocate of grafity center | ||||||
| MultiCut 75... and 76... | JP44757 | |||||
| Ball-type check valve | |||||
| KE40 EN 12050-4 | 1½“ (DN 40), PN 6 | 170x125 (HxB) | JP47974 | |||
| K50 EN 12050-4 | 2“ (DN 50), PN 6 | 185x155 (HxB) | JP44782 | |||
| Stop valve | |||||
| brass, 1½“ (DN 40), PN 16 | 125x60 (HxB) | JP44786 | ||||
| stainless steel, 1½“ (DN 40), PN 16 | 125x80 (HxB) | JP48403 | ||||
| brass, 2“ (DN 50), PN 16 | 140x70 (HxB) | JP44787 | ||||
| Pump base | |||||
| M 220 | 75/2M - 76/2M | JP22302 | ||||
| Reducing socket | |||||
| 1 1/2"-2" for guide rail system GR 35 | JP44776 | |||||
| Pipe connection | ||||||
| 1 1/4" (female thread) | JP16870 | |||||
| Flushing tube | |||||
| Type II | 55/... - 100/... | JP28222 | ||||
| Electrical accessory | ||||||
|---|---|---|---|---|---|---|
| Code No. | ||||||
| Seal leak detector | |||||
| DKG (für die Ölkammer) | JP44900 | |||||