MultiStream 150/4 C6, Ex
JP09883| Mechanical data | |
|---|---|
| Pump | Vertical single-stage |
| Ex-proof | With ex-proof |
| Free passage | 100 mm |
| Bearing | Ball bearings, grease-lubricated |
| Seal on motor side | Duplex shaft seal, from 55/: mechanical seal |
| Oil chamber | Yes |
| Seal on medium side | SiC mechanical seal |
| Run dry protection | Yes |
| Impeller | Channel impeller, grey cast iron from 55/2... spheroidal grapfite iron |
| Motor housing | Grey cast iron |
| Pump housing | Grey cast iron |
| Submersible | Yes |
| Pressure outlet | DN 100 |
| Weight | 247 kg |
| Electrical data | |
|---|---|
| Voltage | 3/PE~400/690 V |
| Motor rating P1 | 15 kW |
| Motor rating P2 | 13.2 kW |
| Current | 26.7 A 15.5 A |
| Power line | 10m H07RN-F |
| Wires | 10G2,5 |
| Type of enclosure | IP 68 |
| Fuse | 35 A |
| S3 | 40 % |
| Performance | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Delivery head H [m] | 1 | 3 | 5 | 7 | 9 | 12 | 14 | 16 | 18 | 20 | 23 | 24 | 26 | 27 | 28 |
| Flow rate Q [m³/h] | 320 | 302 | 280 | 260 | 236 | 202 | 177 | 152 | 126 | 96 | 54 | 43 | 20 | 14 | 8 |
Specifications can be changed without notice. Performance subject to ISO 9906 tolerances.
The minimum flow rate in the pressure pipe of v = 0,7 m/s is marked in the Q-H-diagram (operative limit).
Dimensions guide rail system
Dimensions pump base
Discharge outlet
| Mounting arrangement with guide rail system | |
|---|---|
| GR | 101 |
| DN | 100 |
| A | 910 mm |
| B | 755 mm |
| C | 290 mm |
| D | 250 mm |
| E | 735 mm |
| F | 975 mm |
| G | 580 mm |
| H | 105 mm |
| J | 315 mm |
| K | 110 mm |
| L | 55 mm |
| M | 82 mm |
| N | 1" |
| O | 345 mm |
| P | 175 mm |
| Q | 385 mm |
| Mounting arrangement with base | |
|---|---|
| DN | 100 |
| A | 925 mm |
| B | 610 mm |
| C | 290 mm |
| D | 250 mm |
| E | 250 mm |
| F | 330 mm |
| G | 230 mm |
| K | 180 mm |
| L | 18 mm |
| N | 8 |
Example of installation guide rail system
Additional requirements, see technical data control units
| Mechanical accessory | ||||||
|---|---|---|---|---|---|---|
| Code No. | ||||||
 | Chain | |||||
| certified, 2.5 m, 320 kg, 5 rings (EN 818 mod.) | JP45901 | |||||
| certified, 5.0 m, 320 kg, 8 rings (EN 818 mod.) | JP45902 | |||||
| certified, 7.5 m, 320 kg, 11 rings (EN 818 mod.) | JP47365 | |||||
| Shackle, certified, 630 kg, stainless steel | JP45904 | |||||
| Guide rail system | |||||
| GR 101 | DN 100, 235x254x345 (AxBxH) | JP21037 | ||||
| Guide rail 1" | 1500 mm | JP48937 | ||||
| Guide rail 1" | 2000 mm | JP48938 | ||||
| Guide rail 1" | 2500 mm | JP48939 | ||||
| Guide rail 1" | 3000 mm | JP48940 | ||||
| Swing-type check valve | |||||
| R 101 EN 12050-4 | DN 100, PN 4, flange PN 10, EN 558, 300 (H) | JP00325 | ||||
| R 100 G EN 12050-4 | DN 100, PN 4, flange PN 10, EN 558, with counter weight, 300(H) | JP00324 | ||||
| Sluice valve | |||||
| DN 100, PN 10, EN 1171 | 345x190 (HxB) | JP00329 | ||||
| Flanged spigot | |||||
| DN 100 PN 10, F-KS | 153x110 (HxD) | JP08673 | ||||
| DN 100 PN 10, F-piece | 100x114 (HxD) | JP00688 | ||||
| Elastic connection | |||||
| DN 100, PN 4 | 200x110 (HxD) | JP44778 | ||||
| DN 100, PN 4 | 200x114 (HxD) | JP44774 | ||||
| Hose band clamp | |||||
| 4" (DN 100) | JP44767 | |||||
| Pump base | |||||
| C 410, for C3,C4,C6,C7 | 145x650 (HxB) | JP00702 | ||||
| Flanged connection | |||||
| C 100 (similar Q-piece 90°), DN 100 PN10/PN6 | 175x120 (HxB) | JP00579 | ||||
| Flushing tube | |||||
| Type III | 150/... - 300/... | JP28223 | ||||
| Electrical accessory | ||||||
|---|---|---|---|---|---|---|
| Code No. | ||||||
| Seal leak detector | |||||
| DKG Ex for explosion-proof pumps | JP00249 | |||||