Floor drainage pumps
Plancofix Connect
Floor drain pump with Dallmer design shower channel
The best from the premium manufacturers of Jung Pumpen and Dallmer
Jung Pumpen developed the base housing that contains the pump technology.
The floor housing is completed by a total of 12 different
Dallmer CeraConnect shower drains that form the drain frame.
Modern bathroom design thanks to linear or point drainage
Click-in sealing collar (DIN 18534-compliant)
Installation depth only 7.5 cm !
- Flexible bathroom design with line and/or point drainage
- In combination with shower channels from DALLMER
- Wide range of shower drains
- Click-in seal collar (DIN 18534-konform)
- Installation depth 7,5 cm
- Quiet operation: 27 dB(A), fulfils sound protection according to DIN 4109
- Easy cleaning and maintenance
The Plancofix Connect is a VDE-tested floor drain pump that is installed with shower channels from DALLMER. With the Plancofix Connect it is possible to install ground level/low level showers even in places where it was previously not possible due to a lack of free fall. It must not be used for backwater protection.
Recessed into the screed, the Plancofix Connect forms the floor drain in tileable showers. The incoming water is pumped to the nearest gravity pipe via a 1" pressure pipe. The hand-over point to the gravity pipe should be 15 cm higher than the Plancofix.
The Plancofix Connect requires an installation depth of 7.5 cm including the insulation tray. Together with the DALLMER shower channels CeraWall Connect, CeraFloor Connect or CeraFrame Connect, the Plancofix Connect forms a safely functioning unit. In some countries these shower channels are distributed by HL Hutterer & Lechner GmbH.
Ready-to-connect unit made of high-strength plastic, synchronous motor with non-blocking hydraulics, insulating tray for sound compensation, feet for height adjustment, sealing fleece for connection to the damp-proofing, installation aids and site cover.
The shower channels CeraWall Connect, CeraFloor Connect or CeraFrame Connect from DALLMER are not included in the scope of delivery.
Specifications can be changed without notice. Performance subject to ISO 9906 tolerances.
1 results
| Type | Code No. |
|---|---|
JP50319 |