Utility pump
Simer 6
Simer 6 - pump to the last drop!
The ideal tool for the craftsman
- Removes water down to a level of 2 mm
- Robust cast aluminium housing
- Simer 6S with integrated water level sensor
- Integrated reflux valve
- Starts at a water lever of just 5 mm
- Motor jacked cooling
- Replaceable cable inlet
The Simer 6 and Simer 6S are robust utility pumps for draining cellars, flat roofs, excavations or swimming pools. It can also be used to remove drainage from building sites such as core-hole drilling and concrete cutting. The Simer pump works quickly and efficiently, leaving a residual water level of just 2 mm, while starting to pump at a water level of just 5 mm.
The strainer is easy to remove and reliably protects the hydraulic system from solids. The stepped hose socket makes it possible to connect different hose diameters.
However, connecting Simer pumps permanently to buildings’ drainage systems or using it to protect against back-flow is not permitted. Please refer to our U3 to U6 range of pumps for these types of application.
The Simer 6S has an integrated electronical water level sensor. The switch-on level here is approx. 7 mm. Low-level water can be removed automatically and immediately. Depending on the automatic run-on time, the residual water level is reduced to up to 2 mm.
Pumps with hose connector with ½”/¾”/1” (13/19/25 mm, integrated reflux valve, cable and plug.
Simer 6S integrated water level sensor.
| Delivery head Hmax | 6 m |
| Flow rate Qmax | 4.3 m³/h |
| Free passage | 2 mm |
| Pressure outlet | 1 1/4" |
Specifications can be changed without notice. Performance subject to ISO 9906 tolerances.