Drainage pumps
U6
The specialist for drainage and aggressive wastewater
5-year warranty for plumbers when registered
at www.hauptsachejung.de/en
Made in Germany
- Cooling jacket for motor housing
- Flushing device
- Low level pumping by detachable strainer base
- SiC mechanical seal independent of sense of rotation
- Safe to run dry
- 10/20 mm free passage with EIP technology
- Replaceable moisture sealed cable inlet
The U6K range of pumps is suitable for stationary and portable use. It can be used as a drainage pump for mildly contaminated waste and ground water, in sumps with rain water, drainage or seepage water, silage liquor and also liquid manure. The high quality mechanical seal also makes the pump suitable for extracting abrasive media.
In stationary use the U6K ES/DS removes the waste water from domestic appliances such as dishwashers and washing machines (also high temperature). Guide rail systems offer the advantages of quick and easy maintenance. The Easyfix installation sets are particularly convenient. They are pre-assembled ready to plug in and can be installed as single or duplex systems. Our ready-to-install collecting tanks extend the options for installation and use.
For supporting sewage water with heavy pollution we recommend our US series. Especially for the transportable use, in building site areas for example, our building pumps MultiDrain UV should be used.
If centrifugal submersible pumps are used outdoors, only a pump with 10 m cable without extension cable may be used in accordance with VDE Regulation 0100.
Pump ready for connection acc. to EN 12050 with 90°, 1¼“ female connection elbow, cable and plug, S model with automatic level float switch.
The pump is delivered with attached strainer base, which can be exchanged for the enclosed feet if 20 mm free passage is required.
| Delivery head Hmax | 9 m |
| Flow rate Qmax | 15 m³/h |
| Free passage | 10 mm 20 mm |
| Pressure outlet | 1 1/4" |
Specifications can be changed without notice. Performance subject to ISO 9906 tolerances.
The minimum flow velocity in the pressure piping must be 0.7 m/s according to EN 12056.
This data is represented in the performance curve as a limit of application.
6 results
| Type | Code No. | Ciruit | Voltage | Motor rating P2 | Current | Power line | Plug |
|---|---|---|---|---|---|---|---|
JP00226 | Without level control | 1/N/PE~230 V | 0.5 kW | 3.3 A | 10m H07RN-F | Safety | |
JP00228 | Without level control | 3/PE~400 V | 0.55 kW | 1.3 A | 10m H07RN-F | CEE | |
JP00227 | With built-in level control | 1/N/PE~230 V | 0.5 kW | 3.3 A | 4m H07RN-F | Safety | |
JP00229 | With built-in level control | 3/PE~400 V | 0.55 kW | 1.3 A | 4m H07RN-F | CEE | |
JP09260 | With built-in level control | 1/N/PE~230 V | 0.5 kW | 3.3 A | 10m H07RN-F | Safety | |
JP09261 | With built-in level control | 3/PE~400 V | 0.55 kW | 1.3 A | 10m H07RN-F | CEE |