Multidrain UV3 S, 10 m cable | Jung Pumpen

Multidrain UV3 S, 10 m cable

JP50312

Mechanical data
Pump	Vertical single-stage
Free passage	10 mm
Bearing	Ball bearings, grease-lubricated
Seal on motor side	Rotary shaft seal
Oil chamber	Yes
Seal on medium side	2-fold rotary shaft seals
Run dry protection	Yes
Shaft	Stainless steel
Impeller	Vortex impeller, GFK
Motor housing	Stainless steel
Pump housing	Stainless steel
Submersible	Yes
Weight	5.5 kg

Electrical data
Ciruit	With built-in level control
Pump voltage	1/N/PE~230 V
Motor rating P1	0.34 kW
Motor rating P2	0.23 kW
Current	1.5 A
Power line	10m H07RN-F
Wires	3G1,0
Type of enclosure	IP 68
Insulation class	F
Winding thermostat	Yes
Motor protection	Integrated
Plug	Safety

Performance
Delivery head H [m]	1	2	3	4	5	6
Flow rate Q [m³/h]	7	6.4	5.9	5.2	4.1	2.6

Specifications can be changed without notice. Performance subject to ISO 9906 tolerances.

The minimum flow velocity in the pressure piping must be 0.7 m/s according to EN 12056.
This data is represented in the performance curve as a limit of application.

Dimensions and switching points UV3 S (mm)

Dimensions and switching points special float UV3 SF (mm)

Dimensions and switching points special float UV3 S (mm)

Dimensions and switching points special float UV3 S (mm

Example of single pump installation

Example of duplex installation

Single unit: sump area 30x30 cm

Duplex unit: sump min. 50x50 cm

In case of installation beneath the backpressure level the pressure tube must be taken in a loop over the local backup level acc. to EN 12056. Besides, it must be secured with an EN 12050-4-proofed swing-type check valve. Additionally we recommend an alarm system.

In accordance with EN 12056-4 section 5.1, it has a built-in automatic spare pump or a double attachment included, which ensures that sewage drainage is not interrupted.

Suspend control unit in a dry room


				Code No.
1	Swing-type check valve
	R32 EN 12050-4	1¼“ (DN 32), PN 4	90x90 (HxB)	JP09739
2	Stop valve
		1¼“ (DN 32), PN 16	110x60 (HxB)	JP44785
		brass, 1½“ (DN 40), PN 16	125x60 (HxB)	JP44786
	Ball valve	1¼", PVC, for aggressive media	105x155 (HxB)	JP46111
3	Elastic connection
		+ Hose band clamps, 1¼“ (DN 32), PN 3	100x42 (HxD)	JP50901
4	Hose coupling
	Hose coupling	1¼“ (DN 25) brass, for transportable use		JP50849
	Pressure hose
		15 m, synthetic, Ø 25 mm		JP50830
5	Hose set
		1 1/4" (DN32), 15 m PVC hose c/w elbow		JP43550
6	Special float
		for lower switching points		JP44795
		for narrow chambers (mind. 30x30 od Ø30 cm)		JP40856
	Float fixation	for continuous pump operation		JP42175
7	Connection kit
		DN 32, with telescopable pressure pipe 30-90 cm		JP44609


			Code No.
a	Alarm unit
	AG3	subm. ball contact switch, mains dependent, potential-free contact,3 m cable	JP44891
	AG10	subm. ball contact switch, mains dependent, potential-free contact, 9.5 m cable	JP44892
b	Washing machine stop
	AW3	subm. ball contact switch, mains dependent, 3 m cable	JP44895
f	Rechargeable battery
		9 V, for mains independent alarm	JP44850
g	Smart Home
		FTJP radio transmitter	JP47209