HL 1-610 LCX Set
JP50852| Mechanical data | |
|---|---|
| Type | Single units with pressure switches, without tube set and DRP |
| HxWxL[mm] | 1415 x 316 x 224 |
| Weight | 17.5 kg |
| Main switch | No |
| Electrical data | |
|---|---|
| Pump voltage | 3/N/PE~400 V |
| Motor protection | 6 ... 9 A |
| Pre-fuse | 16 A |
| Type of enclosure | IP 44 |
| Alarm buzzer | Yes |
| Connection 9V battery | Yes |
| Connection thermal contact | Yes |
| Connection dry run protection | Yes |
| Display operation hours/switching cycles | Yes |
| Display amps | Yes |
| Automatic alternate operation | No |
| Automatic test run | Yes |
| Digital signal contact | optinoal |
| Input AUX | Yes |
| Input level control | digital and analog |
| Switch off delay after power outage | Yes |
| Event memory | Yes |
| Integrated GSM-Modem | optinoal |
| Run time monitoring | Yes |
| Max. switching power | 4 kW 3x400V |
| Motor protection typ | Overload rely |
| Stop time for pump operation | Yes |
| Peak load operation | No |
| Start | direct |
| Fault contact pot. Free | 2 changeover contacts, 5A |
Equipment HighLogo LCX/LCSX
| Mechanical accessory | ||||||
|---|---|---|---|---|---|---|
| Code No. | ||||||
 | Retaining plate | |||||
| for air bells (in concrete sumps from Ø 1 m) | JP50213 | |||||
| Electrical accessory | ||||||
|---|---|---|---|---|---|---|
| Code No. | ||||||
| Tube set | |||||
| 10 m, DRP pressure switch and tube set | JP48301 | |||||
| 15 m, DRP pressure switch and tube set | JP48302 | |||||
| 20 m, DRP pressure switch and tube set | JP48303 | |||||
| Level control | |||||
| Weight | to stabilize the subm. ball contact switch | JP44803 | ||||
| Rechargeable battery | |||||
| 9 V, for mains independent alarm | JP44850 | |||||
| Retrofittable accessory | |||||
| CEE-Stecker 16 A | 1.5 m cable | JP50816 | ||||
| Modem GSM for HighLogo | retrofit unit incl. GSM antenna | JP50444 | ||||
| Battery 12V with housing | retrofit unit for independent modem operation | JP50635 | ||||