Drainage pumps
U5
The big sister of the U3 K with more power
5-year warranty for plumbers when registered
at www.hauptsachejung.de/en
Made in Germany
- Cooling jacket for motor housing
- Low level pumping by detachable strainer base
- Flushing device
- Variable discharge branch with closable ventilation
- Safe to run dry
- 10/20 mm free passage with EIP technology
- Moisture sealed cable inlet
The EXO 5 S is an extremely powerful and versatile centrifugal submersible pump for both stationary and portable use. The pump is suitable for faecal-free wastewater with solids up to 10 mm particle size. Thanks to the removable strainer base, it is possible to increase the free passage to 20 mm.
Stationary in a basement chamber or a collecting tank, with an automatic switch attached, the EXO 5 S handles all dirty water arising from domestic drainage sources such as washing machines, dishwashers, washstands, etc. Deposit accumulation in the reservoirs and chambers is reduced to a minimum by means of a flushing device.
Guide rail systems offer the advantages of quick and easy maintenance. The Easyfix installation sets are particularly convenient. They are pre-assembled ready to plug in and can be installed as single or duplex systems. If the sump or tank runs dry temporarily, the pump can be vented by providing a drill-hole in the spiral housing.
The EXO 5 S can be used as a portable unit for dealing with dirty water from garden ponds, flooded cellars or discharge chambers in laundry rooms or storage rooms. Thanks to its shallow, built-in suction system, it can reduce residual water level to no more than a few millimeters.
Pump ready for connection acc. to EN 12050 with 90°, 1¼“ female connection elbow, cable and safety plug, swing-type check valve for mobile use, S model with automatic level float switch.
The pump is delivered fitted with a strainer base which can be swapped for any of the accompanying pedestols in cases where a 20 mm clear passage is required.
| Delivery head Hmax | 8 m |
| Flow rate Qmax | 11 m³/h |
| Free passage | 10 mm 20 mm |
| Pressure outlet | 1 1/4" |
Specifications can be changed without notice. Performance subject to ISO 9906 tolerances.
The minimum flow velocity in the pressure piping must be 0.7 m/s according to EN 12056.
This data is represented in the performance curve as a limit of application.
3 results
| Type | Code No. | Ciruit | Power line |
|---|---|---|---|
JP09386 | Without level control | 10m H05RN-F | |
JP09387 | With built-in level control | 4m H05RN-F | |
JP09417 | With built-in level control | 10m H07RN-F |