COMPLI 400 | Jung Pumpen
Sewage lifting stations

COMPLI 400

The original even better now!

The classic lifting station for the detached house with
versatile connection options
With variable pressure outlet in DN 80 or DN 100
5-year warranty for specialist tradesmen when registered
at www.hauptsachejung.de/en
Made in Germany

  • Ready to connect
  • Submersible
  • Auxiliary inlets vertical/horizontal
  • Revolver clamping flange
  • PE-tank approx. 70 L
  • Vortex impeller
  • Smart home compatible

This sewage lifting station for detached houses is fitted for versatile fields of application. During the design work, special attention was given to easy handling (recessed grips), space-saving and uncomplicated installation.
The submergible unit is permitted for general use in areas subject to flooding. The control unit has to be fitted in a well ventilated flood-proof room.
The PE tank has freely accessible connections, a top-mounted cleaning opening and a height-adjustable inlet socket which can be infinitely adjusted on site to an inlet height of between 180 and 250 mm depending on the drainage situation.
Other horizontally and vertically arranged additional inlets increase the connection and drainage options. The vortex impeller of the pump offers the safety you can rely on.
The Compli sewage lifting station can be integrated into a smart infrastructure. The FTJP radio transmitter is connected to the potential-free contact of the lifting station. It is now possible to transmit the switching status (e.g. an alarm message) to an EnOcean-capable smart home gateway (Wibutler, Afriso, Homee).

Scope of supply

Ready-to-connect disposal system according to German / European standard 12050 with height-adjustable DN 100 inlet socket for inlet heights 180 to 250 mm, horizontal and vertical additional inlets Ø DN 100/DN 50, mounted submersible pump and DN 80 connection flange with pipe unit Ø 110, reducer ring Ø 110 to Ø 90, optionally with pre-mounted DN 80 non-return valve, one elastic connection each with clamps for plastic pressure pipes and a sleeved pipe for DN 70 ventilation pipe, automatic level control, control unit (IP 44 type of protection) with motor protection, contactors, transformer, mains-dependent, optionally acknowledgeable alarm system and potential noc-contact for collective failure messages, optical display of sense of rotation (three-phase current), manual-0-automatic switch as well as an adjustable maintenance interval display.
Cable between tank and control 4 m. Cable between control and plug 1,5 m.

Technical data
Delivery head Hmax
7 m
Flow rate Qmax
48 m³/h
Free passage
70 mm
Pressure outlet
DN 80

Specifications can be changed without notice. Performance subject to ISO 9906 tolerances.

The minimum flow velocity in the pressure piping must be 0.7 m/s according to EN 12056.
This data is represented in the performance curve as a limit of application.

4 results

TypeCode No.VoltageMotor rating P1Motor rating P2CurrentPlug
JP50079
3/N/PE~400 V
1.25 kW
0.87 kW
2.2 A
CEE
JP50081
1/N/PE~230 V
1.55 kW
1.1 kW
7.1 A
Safety
JP50080
3/N/PE~400 V
1.25 kW
0.87 kW
2.2 A
CEE
JP50082
1/N/PE~230 V
1.55 kW
1.1 kW
7.1 A
Safety

Always well informed!

Subscribe to our newsletter


Direct contact

Sales Hotline

Fon + 49 5204 / 17-160

Sales E-Mail

sales.jp@pentair.com

JUNG PUMPEN GmbH

Industriestraße 4-6
33803 Steinhagen
Germany
Fon +49 5204 17-0
E-Mail info@jung-pumpen.de