K2 Plus | Jung Pumpen
Condensate pump

K2 Plus

  • For condensate ≥ pH 2,7
  • Float switch
  • Runtime monitoring with acustic alarm and potential-free alarm contact
  • Visual operating/error display
  • Test run button
  • Integrated check valve

The benefits offered by the new K2 plus condensate pump are a definite plus that make this pump a versatile helper. This pump works dependably to remove acidic condensate with a pH of ≥ 2.7 from gas and oil, condensing boilers, air conditioning systems, air dehumidifiers and cooling units.
The K2 plus satisfies the highest requirements. It is distinguished not only by its modern design but above all by its consistently quiet operation, its compact tank dimensions and its reliability. The pump is ready to connect and operates fully automatically.
A float switch monitors the level inside the tank, while the electronic unit oversees the pump‘s operating time. The user is therefore alerted early to potential problems. The integrated runtime monitoring with acustic alarm can be relayed to other places using the potential-free alarm contact.
The indicator light displays whether the system is operating or whether there is a fault. The good working order of the system can be checked at any time with the test run button.
A sand trap keeps solids out of the hydraulic system. The two-part design of the motor and collecting chamber and the rotary knobs at the side make for easy cleaning without tools.
The K2 plus is resistant to acid condensate with a pH-value of ≥ 2.7. The maximum inlet temperature of the pumped media is 104 °F (40 °C).
In the case of larger volumes of condensate or additional waste water, we recommend using the Hebefix extra.

Scope of supply

Ready to connect with 2 m power cable and safety plug, 6 m PVC-pressure tube (ID 10 mm) with connector DN 50, inlet height 90 mm

Specifications can be changed without notice. Performance subject to ISO 9906 tolerances.

The minimum flow velocity in the pressure piping must be 0.7 m/s according to EN 12056.
This data is represented in the performance curve as a limit of application.

1 results

TypeCode No.
JP46589

Always well informed!

Subscribe to our newsletter


Direct contact

Sales Hotline

Fon + 49 5204 / 17-160

Sales E-Mail

sales.jp@pentair.com

JUNG PUMPEN GmbH

Industriestraße 4-6
33803 Steinhagen
Germany
Fon +49 5204 17-0
E-Mail info@jung-pumpen.de