K2 Plus | Jung Pumpen

K2 Plus

JP46589

Mechanical data
Shaft	Stainless steel
Impeller	Vortex impeller, plastic
Usable capacity	0,9 l
Weight	3.1 kg

Electrical data
Voltage	1/N/PE~230 V
Motor rating P1	65 W
Current	0.58 A
Power line	2m H05VV-F
Wires	3G0,75
Type of enclosure	IP 24
Motor protection	Thermostat
Plug	Safety

Performance
Delivery head H [m]	1,5	2	2,5	3	3,5
Flow rate Q [l/h]	520	440	365	290	200

Specifications can be changed without notice. Performance subject to ISO 9906 tolerances.

The minimum flow velocity in the pressure piping must be 0.7 m/s according to EN 12056.
This data is represented in the performance curve as a limit of application.

Dimensions K2 plus (mm)

Example of installation

Condensates taken from condensing boiler technology are very aggressive. You will find corresponding information in the ATV working paper „Condensates from condensing boilers“, ATV-DVWL-A 251 (2011). The K2 plus is designed for use at room temperatures, a pH value of ≥ 2.7 and a maximum inlet temperature of 104 °F (40 °C). Should the condensate values fall below the above-mentioned pH value even for a short time, a neutralisation has to be installed between therm and pump. The local requirements (local discharge regulation) as well as the neutralisation obligations of the ATV working paper are to be considered as well. Guiding values for untreated condensate can be found in the mentioned ATV working paper, table B.1. For condensate lines only approved materials in accordance with ATV working paper table 4 are to be used. If not already integrated in the unit all inlets must be provided with a siphon trap (emission trap). It is generally not permitted to install the unit outdoors.


			Code No.
1	Hose extension
		6 m, with hose connector	JP27993


			Code No.
a	Smart Home
		FTJP radio transmitter	JP47209