MultiCut 08/2 M | Jung Pumpen

MultiCut 08/2 M

JP50344

Mechanical data
Pump	Vertical single-stage
Bearing	Ball bearings, grease-lubricated
Seal on motor side	Duplex rotary shaft seals
Oil chamber	Yes
Seal on medium side	SiC mechanical seal
Run dry protection	Yes
Impeller	Vortex impeller, GFK
Motor housing	Stainless steel
Pump housing	Grey cast iron
Submersible	Yes
Pressure outlet	DN 32
Weight	16.5 kg

Electrical data
Ciruit	Without level control
Voltage	3/PE~400 V
Motor rating P1	1.65 kW
Motor rating P2	1.24 kW
Current	2.8 A
Power line	10m H07RN-F
Wires	4G1,0
Type of enclosure	IP 68
Winding thermostat	Yes
Motor protection	In motor
Plug	CEE-16A
S3	10 %

Performance
Delivery head H [m]	1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16
Flow rate Q [m³/h]	18.5	18	17.5	17	16.5	15.5	15	14	13	12	11	10	9	7.5	6	4.5

Specifications can be changed without notice. Performance subject to ISO 9906 tolerances.

The minimum flow velocity in the pressure piping must be 0.7 m/s according to EN 12056.
This data is represented in the performance curve as a limit of application.

Dimensions 08/2 M (mm)

Dimensions 08/2 M, EX (mm)

Example of pump base installation

Example of pump base installation with ex-proof

Example of guide rail installation

Example of guide rail installation with ex-proof

Example of guide rail installation

Example of guide rail installation with ex-proof

Single unit - min. sump (cm)
without GR: 40x40
with GR and swing-type check valve: 40x65
with GR and ball-type check valve: 40x65

Duplex unit - min. sump (cm)
without GR and swing-type check valve, check valve: 60x60
without GR and elbow-ball check valve: 60x80
with GR and duplex swing-type check valve: 60x60
with GR and duplex swing-type check valve or -valve: 65x85


				Code No.
1	Chain
		certified, 2.5 m, 320 kg, 5 rings (EN 818 mod.)		JP45901
		certified, 5.0 m, 320 kg, 8 rings (EN 818 mod.)		JP45902
		certified, 7.5 m, 320 kg, 11 rings (EN 818 mod.)		JP47365
		Shackle, certified, 630 kg, stainless steel		JP45904
	Webbing
		with shackle		JP45168
2	Guide rail system
	GR 35	1 1/2" female thread for MultiCut 08 without Ex-proof		JP29953
3	Swing-type check valve
	R40 EN 12050-4	1½“ (DN 40), PN 4	150x120 (HxB)	JP00317
	DR 40 EN 12050-4	1½“ (DN 40), PN 4	200x280 (HxB)	JP09155
	R50 EN 12050-4	2“ (DN 50), PN 4	150x120 (HxB)	JP00326
	Ball-type check valve
	KE40 EN 12050-4	1½“ (DN 40), PN 6	170x125 (HxB)	JP47974
	K50 EN 12050-4	2“ (DN 50), PN 6	185x155 (HxB)	JP44782
4	Stop valve
		brass, 1½“ (DN 40), PN 16	125x60 (HxB)	JP44786
		stainless steel, 1½“ (DN 40), PN 16	125x80 (HxB)	JP48403
		brass, 2“ (DN 50), PN 16	140x70 (HxB)	JP44787
5	Elastic connection
		+ Hose band clamps, 1½“ (DN 40), PN 4	120x50 (HxD)	JP50902
		+ Hose band clamps, 2“ (DN 50), PN 4	150x63 (HxD)	JP50903
6	Bases
		(for 08/2 MS and MES in scope of supply		JP44759
	Retaining plate
		for air bells (in concrete sumps from Ø 1 m)		JP50213
7	Reducing socket
		1 1/2"-2" for guide rail system GR 35		JP44776
8	Pipe connection
		1 1/4" (female thread)		JP16870
9	Flushing tube
		Type I-M stainless steel with connection flange (not PKS-B 800)		JP40333


			Code No.
b	Control for single units
	Control unit HIGHLOGO 1-25 LC	400 V	JP47984
	Control unit AD 25 ExM, TLS	400 V	JP43159
	Control for duplex units
	Control unit HIGHLOGO 2-25 LC	400 V	JP47993
	Control unit BD 25 ExM, TLS	400 V	JP43165
c	Rechargeable battery
		9 V, for mains independent alarm	JP44850
d	Seal leak detector
		DKG (für die Ölkammer)	JP44900
e	Smart Home
		FTJP radio transmitter	JP47209