MultiCut 08/2 ME
JP50342| Mechanical data | |
|---|---|
| Pump | Vertical single-stage |
| Bearing | Ball bearings, grease-lubricated |
| Seal on motor side | Duplex rotary shaft seals |
| Oil chamber | Yes |
| Seal on medium side | SiC mechanical seal |
| Run dry protection | Yes |
| Impeller | Vortex impeller, GFK |
| Motor housing | Stainless steel |
| Pump housing | Grey cast iron |
| Submersible | Yes |
| Pressure outlet | DN 32 |
| Weight | 16.2 kg |
| Electrical data | |
|---|---|
| Ciruit | Without level control |
| Voltage | 1/N/PE~230 V |
| Motor rating P1 | 1.37 kW |
| Motor rating P2 | 0.98 kW |
| Current | 6 A |
| Power line | 10m H07RN-F |
| Wires | 3G1,0 |
| Type of enclosure | IP 68 |
| Winding thermostat | Yes |
| Motor protection | In motor |
| Plug | Safety |
| S3 | 10 % |
| Performance | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Delivery head H [m] | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 |
| Flow rate Q [m³/h] | 16.5 | 15.5 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 7.5 | 6.5 | 5 | 3.5 | 1.5 |
Specifications can be changed without notice. Performance subject to ISO 9906 tolerances.
The minimum flow velocity in the pressure piping must be 0.7 m/s according to EN 12056.
This data is represented in the performance curve as a limit of application.
Dimensions 08/2 M (mm)
Dimensions 08/2 M, EX (mm)
Example of pump base installation
Example of pump base installation with ex-proof
Example of guide rail installation
Example of guide rail installation with ex-proof
Example of guide rail installation
Example of guide rail installation with ex-proof
Single unit - min. sump (cm)
without GR: 40x40
with GR and swing-type check valve: 40x65
with GR and ball-type check valve: 40x65
Duplex unit - min. sump (cm)
without GR and swing-type check valve, check valve: 60x60
without GR and elbow-ball check valve: 60x80
with GR and duplex swing-type check valve: 60x60
with GR and duplex swing-type check valve or -valve: 65x85
| Mechanical accessory | ||||||
|---|---|---|---|---|---|---|
| Code No. | ||||||
 | Chain | |||||
| certified, 2.5 m, 320 kg, 5 rings (EN 818 mod.) | JP45901 | |||||
| certified, 5.0 m, 320 kg, 8 rings (EN 818 mod.) | JP45902 | |||||
| certified, 7.5 m, 320 kg, 11 rings (EN 818 mod.) | JP47365 | |||||
| Shackle, certified, 630 kg, stainless steel | JP45904 | |||||
| Webbing | ||||||
| with shackle | JP45168 | |||||
| Guide rail system | ||||||
| GR 35 | 1 1/2" female thread for MultiCut 08 without Ex-proof | JP29953 | ||||
| Swing-type check valve | |||||
| R40 EN 12050-4 | 1½“ (DN 40), PN 4 | 150x120 (HxB) | JP00317 | |||
| DR 40 EN 12050-4 | 1½“ (DN 40), PN 4 | 200x280 (HxB) | JP09155 | |||
| R50 EN 12050-4 | 2“ (DN 50), PN 4 | 150x120 (HxB) | JP00326 | |||
| Ball-type check valve | ||||||
| KE40 EN 12050-4 | 1½“ (DN 40), PN 6 | 170x125 (HxB) | JP47974 | |||
| K50 EN 12050-4 | 2“ (DN 50), PN 6 | 185x155 (HxB) | JP44782 | |||
| Stop valve | |||||
| brass, 1½“ (DN 40), PN 16 | 125x60 (HxB) | JP44786 | ||||
| stainless steel, 1½“ (DN 40), PN 16 | 125x80 (HxB) | JP48403 | ||||
| brass, 2“ (DN 50), PN 16 | 140x70 (HxB) | JP44787 | ||||
| Elastic connection | |||||
| + Hose band clamps, 1½“ (DN 40), PN 4 | 120x50 (HxD) | JP50902 | ||||
| + Hose band clamps, 2“ (DN 50), PN 4 | 150x63 (HxD) | JP50903 | ||||
| Bases | |||||
| (for 08/2 MS and MES in scope of supply | JP44759 | |||||
| Retaining plate | ||||||
| for air bells (in concrete sumps from Ø 1 m) | JP50213 | |||||
| Reducing socket | |||||
| 1 1/2"-2" for guide rail system GR 35 | JP44776 | |||||
| Pipe connection | ||||||
| 1 1/4" (female thread) | JP16870 | |||||
| Electrical accessory | ||||||
|---|---|---|---|---|---|---|
| Code No. | ||||||
| Control for single units | |||||
| Control unit HIGHLOGO 1-00 E | 230 V | JP47987 | ||||
| + startic air level control | werkseitige montiert | JP26196 | ||||
| Control unit AD 00 E | 230 V | JP00289 | ||||
| Control for duplex units | ||||||
| Control unit HIGHLOGO 2-00 E | 230 V | JP47996 | ||||
| + startic air level control | werkseitige montiert | JP26196 | ||||
| Control unit BD 00 E | 230 V, for pumps U3-U6, US 62-105, UV3, UV 300, 08/2 ME | JP45735 | ||||
| Level control | ||||||
| Subm. switch pack A | 2 Tauchschalter 9,5 m und Leitungshalter | JP16718 | ||||
| Subm. switch pack AmG | 2 subm. ball contact switch with 9.5 m and counterweight | JP16719 | ||||
| Subm. switch pack B | 3 subm. ball contact switch with 9.5 m and fixing devices | JP16725 | ||||
| Subm. switch pack BmG | 3 subm. ball contact switch with 9.5 m and counterweight | JP16726 | ||||
| Rechargeable battery | |||||
| 9 V, for mains independent alarm | JP44850 | |||||
| Seal leak detector | |||||
| DKG (für die Ölkammer) | JP44900 | |||||