MultiCut 36/2 M Tan, EX | Jung Pumpen

MultiCut 36/2 M Tan, EX

JP50368

Mechanical data
Pump	vertical, double-stage
Ex-proof	With ex-proof
Bearing	Ball bearings, grease-lubricated
Seal on motor side	Duplex rotary shaft seals
Oil chamber	Yes
Seal on medium side	SiC mechanical seal
Run dry protection	Yes
Impeller	Vortex impeller, grey cast iron
Motor housing	Grey cast iron
Pump housing	Grey cast iron
Submersible	Yes
Pressure outlet	DN 32
Weight	94 kg

Electrical data
Voltage	3/PE~400 V
Motor rating P1	4.2 kW
Motor rating P2	3.42 kW
Current	7.3 A
Power line	10m H07RN-F
Wires	6G1,5
Type of enclosure	IP 68
Insulation class	F
Winding thermostat	Yes
Motor protection	Thermostat
Fuse	10 A
S3	30 %

Performance
Delivery head H [m]	48	52	56	60	64	68	72
Flow rate Q [m³/h]	16	15	13	11	9	6,5	3,5

Specifications can be changed without notice. Performance subject to ISO 9906 tolerances.

The minimum flow velocity in the pressure piping must be 0.7 m/s according to EN 12056.
This data is represented in the performance curve as a limit of application.

Dimensions tandem system (mm)

Example of tandem system installation


				Code No.
1	Chain
		certified, 2.5 m, 320 kg, 5 rings (EN 818 mod.)		JP45901
		certified, 5.0 m, 320 kg, 8 rings (EN 818 mod.)		JP45902
		certified, 7.5 m, 320 kg, 11 rings (EN 818 mod.)		JP47365
		Shackle, certified, 630 kg, stainless steel		JP45904
2	Guide rail system
	GR 35	1 1/2" female thread for MultiCut pumps		JP14094
	Guide rail 1"	3000 mm		JP48940
	Guide rail 1"	2500 mm		JP48939
	Guide rail 1"	2000 mm		JP48938
	Guide rail 1"	1500 mm		JP48937
3	Stop valve
		brass, 1½“ (DN 40), PN 16	125x60 (HxB)	JP44786
		stainless steel, 1½“ (DN 40), PN 16	125x80 (HxB)	JP48403
		brass, 2“ (DN 50), PN 16	140x70 (HxB)	JP44787


			Code No.
a	Seal leak detector
		DKG Ex for explosion-proof pumps	JP00249