U3K, 10 m cable
JP50002| Mechanical data | |
|---|---|
| Pump | Vertical single-stage |
| Free passage | 10 mm |
| Bearing | Ball bearings, grease-lubricated |
| Seal on motor side | Rotary shaft seal |
| Oil chamber | Yes |
| Seal on medium side | 2-fold rotary shaft seals |
| Run dry protection | Yes |
| Shaft | Stainless steel |
| Impeller | Vortex impeller, GFK |
| Motor housing | Stainless steel |
| Pump housing | GRP |
| Submersible | Yes |
| Pressure outlet | 1 1/4" |
| Weight | 3.7 kg |
| Electrical data | |
|---|---|
| Ciruit | Without level control |
| Voltage | 1/N/PE~230 V |
| Motor rating P1 | 0.32 kW |
| Motor rating P2 | 0.2 kW |
| Current | 1.4 A |
| Power line | 10m H05RN-F |
| Wires | 3G0,75 |
| Type of enclosure | IP 68 |
| Insulation class | F |
| Winding thermostat | Yes |
| Motor protection | Integrated |
| Plug | Safety |
| Performance | ||||||
|---|---|---|---|---|---|---|
| Delivery head H [m] | 1 | 2 | 3 | 4 | 5 | 6 |
| Flow rate Q [m³/h] | 6,5 | 6 | 5,7 | 5 | 4 | 2,4 |
Specifications can be changed without notice. Performance subject to ISO 9906 tolerances.
The minimum flow velocity in the pressure piping must be 0.7 m/s according to EN 12056.
This data is represented in the performance curve as a limit of application.
Single unit with GR: sump area min. 40x50 cm or Ø 50 cm
Single unit without GR: sump area min. 40x40 cm or Ø 40 cm
Duplex unit with GR: sump area min. 50x50 cm, Ø 60 cm
Duplex unit without GR: sump area min. 50x50, Ø 55 cm
Single unit Easyfix 32 Single: sump min. 30x40 cm, Ø 40 cm
Duplex unit Easyfix 32 Duo: sump min. 45x40 cm, Ø 55 cm
Duplex unit Easyfix 32 Duo with special float: sump min. 50x50 cm Ø 70 cm
In case of installation beneath the backpressure level the pressure tube must be taken in a loop over the local backup level acc. to EN 12056. Besides, it must be secured with an EN 12050-4-proofed swing-type check valve. Additionally we recommend an alarm system.
In accordance with EN 12056-4 section 5.1, it has a built-in automatic spare pump or a double attachment included, which ensures that sewage drainage is not interrupted.
Suspend control unit in a dry room
| Mechanical accessory | ||||||
|---|---|---|---|---|---|---|
| Code No. | ||||||
 | Swing-type check valve | |||||
| R32 EN 12050-4 | 1¼“ (DN 32), PN 4 | 90x90 (HxB) | JP09739 | |||
| DR 40 EN 12050-4 | 1½“ (DN 40), PN 4 | 200x280 (HxB) | JP09155 | |||
| Rupper flap DN32 | for transportable use | 35x35 (HxB) | JP50774 | |||
| Stop valve | |||||
| 1¼“ (DN 32), PN 16 | 110x60 (HxB) | JP44785 | ||||
| brass, 1½“ (DN 40), PN 16 | 125x60 (HxB) | JP44786 | ||||
| Elastic connection | |||||
| 1¼“ (DN 32), PN 3 | 100x42 (HxD) | JP44773 | ||||
| Hose band clamp | |||||
| 1¼“ | JP44765 | |||||
| Hose coupling | |||||
| Hose coupling | 1¼“ (DN 32) brass, for transportable use | JP00327 | ||||
| House connection | 1¼“ – 38/32/25 | JP44209 | ||||
| Hose set | |||||
| 1 1/4" (DN32), 15 m PVC hose c/w elbow | JP43550 | |||||
| Guide rail system | |||||
| GR 32 | JP44000 | |||||
| Support for guide rail extension | ex 2 m sump depth, per m 1 piece | JP28314 | ||||
| Connection kit | |||||
| DN 32, with telescopable pressure pipe 30-90 cm | JP44609 | |||||
| Electrical accessory | ||||||
|---|---|---|---|---|---|---|
| Code No. | ||||||
| Washing machine stop | |||||
| AW3 | subm. ball contact switch, mains dependent, 3 m cable | JP44895 | ||||
| Control for duplex units | |||||
| Control unit HIGHLOGO 2-00 E | 230 V | JP47996 | ||||
| Control unit BD 00 E | 230 V, for pumps U3-U6, US 62-105, UV3, UV 300, 08/2 ME | JP45735 | ||||
| Level control | ||||||
| Subm. switch pack B | 3 subm. ball contact switch with 9.5 m and fixing devices | JP16725 | ||||
| Subm. switch pack BmG | 3 subm. ball contact switch with 9.5 m and counterweight | JP16726 | ||||
| Rechargeable battery | |||||
| 9 V, for mains independent alarm | JP44850 | |||||
| Smart Home | |||||
| FTJP radio transmitter | JP47209 | |||||